|
Here's How it Works:
Step 1:
Raw, untreated water enters
RainSoft's exclusive 9-cycle control valve and flows down through the
resin tank.
Step 2:
The water is filtered and softened as
it passes the special "Ion Exchange" resin. Specific unwanted
foreign substances are ionically retained in and on the resin. The
optional charcoal bed further polishes and clarifies the water.
Step 3:
After the water has been completely
conditioned it exits the resin tank through the riser pipe and out the
control valve.
Step 4:
At metered intervals, the exclusive
9-cycle regeneration takes place. Using salt as a regenerant, the
retained foreign substances are flushed down the drain. Then the unit
prepares itself for the next conditioning cycle.
|